Metra has collaborated with VIBE Audio to create this state-of-the-art plug-n-play audio system engineered specifically for BOSE amplified 2019-2025 GMC Sierra or Chevy Silverado trucks. This complete, all-in-one premium audio kit includes every component required to install a fully integrated aftermarket sound system, eliminating the need to source parts individually.
The kit features matched amplifiers, a total of six speakers for the front and rear of the vehicle, and a 10" subwoofer in a ported enclosure, along with Metra’s vehicle-specific installation solutions designed to simplify the upgrade process. Integration components such as the plug-n-play T-harness, speaker adapters, amplifier brackets, and mounting solutions ensure seamless compatibility and straightforward installation.
Each component in this kit has been engineered and tuned to work together as a unified system, delivering crystal-clear highs, rich midrange, and deep, controlled bass tailored to the truck's interior. Because the system is designed as a complete package, all included components are required for proper performance and are not intended to be sold or installed separately.
Complete All-In-One Kit
The complete premium audio system includes the following part numbers, which together provide all components required for installation:
- BLK-GM-PPKT-A: Vehicle-specific installation and integration components
- GM-SL1-10: 10" subwoofer enclosure
Features:
- Complete all-in-one vehicle-specific audio kit
- Components engineered to function as a single integrated system
- Designed for Bose amplified models
- Simplified plug-n-play installation
- Balanced, vehicle-tuned sound performance
- 1-year warranty
Estimated installation time is 3 to 4 hours with 1 experienced technician
Check out our detailed instructions for this install here: Silverado Instructions / Sierra Instructions
Plug-n-play audio system includes:
- Pair 400-watt 4-channel 100 x 4 amplifiers
- Pair 2.7” dash speakers
- Pair 6”x9” front door speakers
- Pair 6.5” rear door speakers
- 10” subwoofer
- 10” down-firing ported sub enclosure
- Pre-tuned Metra vehicle-specific interface
- Vehicle-specific amplifier installation harnesses
- Vehicle-specific amp mounting rack
- Detailed step-by-step instructions
PB100.4M-V0 Amplifiers
- Max power: 960W
- Power output @ 2 ohms: 120W x 4
- Power output @ 4 ohms: 100W x 4
- Power output @ 4 ohms bridged: 240W x 2
- System delivers up to 1920 watts of maximum power
- Dimensions: 1.9” H x 9.1” W x 5.3” D (47mm x 230mm x 134mm)
- Class D
CVEN2.7M-V4 2.7" Dash Speakers
- 2.7” speaker size
- Peak: 160W RMS, 80W
- Sensitivity: 87dB
- Frequency response: 300Hz – 20kHz
- Impedance: 4 ohms
- Metra 82-3024 dash tweeter adapter plates
- Metra 72-4573 dash tweeter harnesses
CVEN69MW-V4 6"x9" Front Door Speakers
- 6”x9” speaker size
- Peak: 260W RMS, 130W
- Sensitivity: 91dB
- Frequency response: 40Hz – 20kHz
- Impedance: 4 ohms
- Metra 82-3004 door speaker adapter plates
- Metra 72-4572 door speaker harnesses
OPTI6-V4 6.5" Rear Door Speakers
- 6.5” speaker size
- Peak: 270W RMS, 90W
- Sensitivity: 94dB
- Frequency response: 55Hz – 20KkHz
- Impedance: 4 ohms
- Metra 82-3006 rear door speaker adapter plates
- Metra 72-4572 rear door speaker harnesses
- Metra IBSBF65 2-piece speaker baffle kit included for enhanced sound directionality and sealing
GM-SL1-10 10” Subwoofer & Down-Firing Ported Enclosure
- 10” speaker size
- Peak: 900W RMS, 300W
- Sensitivity: 85dB
- Frequency response: 30Hz – 1KkHz
- Impedance: Dual 2 ohms
Metra Vehicle-Specific Amplifier Interface
- AXDSPX-ETH1 DSP interface
- Plug-n-play integration harnessing
- Pre-tuned and optimized for the driver’s listening position
- Retains factory chimes, including parking sensors with adjustable level
- Retains OnStar® voice prompts
- All chimes and voice prompts go through the aftermarket amp
Metra Amplifier Installation Kit
- Vehicle-specific wiring
- 18.5’ 4GA OFC power wire
- 21’ 8GA OFC ground wire
- T-Spec MANL water-tight fuse holder with 100A MANL fuse
- Distribution block
- Mounting hardware
Metra Amplifier Mounting Rack
- Vehicle-specific design
- CNC machine-cut with pre-drilled holes
- Designed to mount to OE bolt locations for easy installation behind the rear seat
Refer to our Vehicle Fit Guide for up-to-date vehicle-specific applications.
