LED Accessory Camera with Multi-Mounts & Active Parking Lines

Enjoy an unobstructed view while driving with a rear camera that stays active while the vehicle is on, not just when it is in reverse*. This universal camera is ideal for monitoring cargo, the trailer hitch, or reducing blind spots at the rear of the vehicle while driving.  iBEAM’s TE-2MPLTC camera features active parking lines (shown while the camera is active) and a separate trigger for the LEDs that can be activated when the vehicle is in reverse. LEDs provide a minimum of 0.1 lux of illumination for improved visibility in low-light conditions. For easy installation, a license plate mount and surface mount are included, along with a 27-foot extension harness. This camera has a resolution of 640 TV lines (CVBS) or 1280 TV lines (AHD) with a 1/3" CMOS image sensor and a 140-degree viewing angle (CVBS) or 142-degree viewing angle (AHD). It features an improved power circuit, is rated IP67 for water resistance, and has a durable metal housing. 

*When used with a compatible monitor. Recommended for use with iBEAM’s TE-43VS, TE-50VS, and TE-7VS.

Features:  

Multiple mounts included - behind plate mount and surface mount  

Improved power circuit  

Can be viewed while driving, with a compatible monitor  

Ability to trigger LEDs separately from the camera's power  

LEDs for night vision - triggered only when in reverse  

Active parking lines  

Water-resistant to protect from the elements  

Mounting: rear  

3-year warranty

Specs:

Image sensor: 1/3 inch CMOS image sensor

TV system: CVBS: 640TV lines AHD: 1280TV lines

Effect pixels: 1280(H) x 720(V)

Pixel size: 3.75 μmx 3.75 μm

Min illumination: 0.1 lux

Video out: 1MP, 720P@60fps

Sensitivity: 12448mV/lux·s

Power supply: 9-16VDC

Lens spec.: 6G+1IRF

Diagonal viewing angle: AHD 142°; CVBS 140°

Current consumption: ≤120mAH

Operating temperature: -20 to +70° C

Storage temperature: -30 to +85° C

IP rating: IP67

Wire Lengths:  

Extension cable: 8.2M / 27'  

Camera cable: 1.5M / 5'